16
P2 USB Driver
Installing the P2 USB Driver for
Windows
Install the P2 USB driver on the supplied
CD-ROM on your personal computer.
The dedicated software is installed at the same
time.
For the installation procedure, refer to the
installation manual in the Manuals folder on the
CD-ROM.
<Note>
If you have two or more devices, install the P2
USB driver for each device.
Installing the P2 USB Driver for
Macintosh
This driver software enables a Macintosh to
access content on a P2 card inserted in the P2
drive.
For the driver installation procedure, refer to
“2. Installation of the P2 Software” in the
installation manual in the Manuals folder on the
CD-ROM.
<Notes>
z
If the P2 USB driver is not installed, a sufficient
transfer rate may not be possible.
z
The latest driver information can be viewed at
the following website.
http://pro-av.panasonic.net/
Uninstallation
For Windows:
For the uninstallation procedure, see the
installation manual.
<Notes>
z
At installation, be sure to check that the device
is switched on before connecting.
z
This P2 USB driver can use both USB 2.0 and
USB 3.0.
AJ-PCD30P_E-VQT3R23-2_E.book 16 ページ ２０１３年３月６日 水曜日 午後６時１分
