24
Marking
When C/A RECORD: ON, VCR automatically rewinds the
tape after a recording has been made and marks the
beginning and end of any detected commercial blocks. After
marking is done, the tape is returned to the end of recording.
Commercials are not erased from the tape.
Press ACTION*
to display MENU.
Press
to select C/A
and display SET UP
COMMERCIAL ADV.
Press
to select C/A RECORD
and press to set.
ON
Timer, VCR Plus+ System, and One Touch recordings are marked automatically.
When STOP is pressed during normal recording, Select One of a)
or b) or c).
a) Press 1 key to mark the recording now.
“NOW MARKING COMMERCIALS” appears.
b) Press 2 key to mark the recording later (after the power has
been turned off).
• If the tape is rewound and another recording started before the
power is turned off, commercials may not be marked correctly.
c ) Press ACTION to cancel the marking of this recording.
• When using the timer to record two
adjacent shows on the same
channel, better accuracy can be
obtained by programming each
shows separately.
Ready Check List
All connections are made.
One time Setup completed.
VCR is plugged in.
TV is turned on and set to CH3, 4
or Video on TV.
Note
NUMBER
keys
:PLAY
:STOP
:FF
:REW
SELECT/
SET
ACTION
detects and marks the beginning and
end points of commercials on your tape for recordings over 15
minutes in length. When
marked tape
is played back, the VCR automatically advances through the
commercial segments at high speed. You can also set this feature
to Manual so as to have more control over the advance process.
The effectiveness of this system can vary due to differences in the
way television stations broadcast. See page 26 for answers to the
most commonly asked questions about this feature.
OFF
The VCR will not mark commercials.
When you are editing or dubbing a tape, or when you do not wish to use this feature, OFF
should be selected.
2
3
1
SELECT :
EXIT : ACT I ON
REPEAT PLAY :OFF
T I ME STAMP :ON
REMOTE WARNING :ON
AUTO SHUT- OFF :ON
IDIOMA/LANGUE : ENGLISH
VCR’ S OUTPUT CH :3
VCR C / A CLOCK CH
SELECT :
EXIT : ACT I ON
SET UP COMMERCIAL ADV.
C/A RECORD :ON
C/A PLAYBACK :AUTO
VCR C / A CLOCK CH
4
THE VCR IS WAITING TO
MARK COMMERCIALS IN THE
PROGRAM YOU RECORDED.
MARKING
NOW : PRESS 1
LATER : PRESS 2
CANCEL : PRESS ACTION
Press ACTION again
to return to normal screen.
Tape Operation
V
C
R
+
VCR C / A CLOCK CH
SELECT : SET :
EXIT : ACT I ON
SET UP COMMERCIAL ADV.
C/A RECORD :ON
C/A PLAYBACK :AUTO
Содержание Omnivision PV-V4621
