Panasonic Omnivision PV-V4621, Руководство по обслуживанию

Страница: 126 / 171

9
Press ACTION Key on the Remote to
display CLOCK Menu screen.
5
If “Auto Clock Set is Incomplete”
screen appears, set the clock using
MANUAL CLOCK SET procedure
shown below.
Manual Clock Set
1
If Auto Clock Set was incomplete, manually
set the clock as follows.
VCR C / A CLOCK CH
5 /13 / 20 0 1 SUN 2 : 20PM
END : CH UP KEY
DST : ON
SETT I NG : CH 10
AUTO CLOCK SET
COMPLETED
AUTO CLOCK SET IS
INCOMPLETE
PLEASE SET CLOCK BY
PRESSING ACTION KEY
VCR C / A CLOCK CH
SELE CT MONTH
DST:ON
1 / /
:
SELECT : SET :
EXIT : ACT I ON
VCR C / A CLOCK CH
2
Press to select the month and
to set. In the same manner, select and
set the date, year, time, and DST
(daylight saving time).
3
SET COMPLETED
DST:ON
11 /11 / 2001 SUN 12:00PM
START : ACT I ON
SET :
VCR C / A CLOCK CH
Press ACTION Key twice to start
CLOCK and exit.
Use when moving VCR to new
location, or if a mistake was made in
the Initial Setup section.
• Make sure a tape is not inserted in
the VCR.
Turn VCR
Power on.
2
Reset All VCR Memory Functions
1
3
PLAY
STOP/EJECT
REC
REW FF
POWER VCR/TV
/
CHANNEL
Press CH Key to start Channel/Clock
Auto Set operation. Settings are
performed automatically. If the setup is
completed, the following screen is
displayed.
Press and hold both
PLAY and CHANNEL
on the VCR for
more than 5 seconds.
• The power shuts off.
Do “Initial Setup” on page 8.
Initial Setup
(Connection)
*Important: If a remote control button does not work when pressed, press
the VCR button on the remote and try the button again.
V
C
R
+
POWER
SELECT/
SET
ACTION
CH /
:PLAY
:STOP
:REW
:FF
VCR
VCR/TV