Panasonic Omnivision PV-V4621, Руководство по обслуживанию

Страница: 136 / 171

19
To Make Corrections,
press repeatedly
to delete number, then
repeat step 3.
Press PROG/VCR+ button
to display PROGRAM.
Press PROG/VCR+ button
to end program.
VCR Plus+ System Programming
Press
to select display VCR
Plus+ screen.
Press number keys
to enter PlusCode
number and press
PROG/VCR+ button to set.
Press
to select ONCE,
DAILY(MON~FRI), or
WEEKLY record frequency
and press PROG/VCR+
button to set.
Press
to change category and
record speed.
Press to set.
7
3
2
1
4
5
6
Do normal Timer Record if...
• PlusCode number is not listed for
program.
• program (e.g. sports event) may run
over set stop time.
See page 17 to:
• cancel a timer recording in progress.
• review, replace, or clear program
contents.
Important for DSS/Cable Box Users
• When recording via DSS, the receiver
must be left on. When recording via
cable or antenna, DSS receiver must
be off.
• When recording via a cable box,
leave box on and tuned to channel to
be recorded.
• Do not overlap program times.
• PlusCode numbers cannot be used to
program VCR to record DSS and
cable box channels.
• Make each entry within 1 minutes or
the VCR will exit setup mode.
• Once VCR Plus+ channel setup is
done, channels stay in memory. If a
power interruption occurs, VCR Plus+
channel setup may be lost. Please do
VCR Plus+ channel setup again.
Notes
Ready Check List
Clock is set.
VCR Plus+ Setup is complete (see page 18).
VCR Plus+ PROG. LIST
13 SAT --:-- --:-- --
TODAY
CATEGORY : N/A SLP
DATE START STOP CH
SELECT :
EXIT : PROG
VCR Plus+ PROG. LIST
SELECT :
EXIT : PROG
ENTER PLUSCODE NUMBER
USING 0 - 9 KEYS
-
VCR Plus+ PROG. LIST
SELECT :
END : PROG
ONCE
DAILY(MON-FRI)
WEEKLY
VCR Plus+ PROG. LIST
P DT START STOP CH SPD
1 13 2 : 00 P 3 : 20 P 02 SLP
2 -- -- : -- -- : -- -- --
3 -- -- : -- -- : -- -- --
4 -- -- : -- -- : -- -- --
CANCEL : ADD / DLT
SELECT : SET :
EXIT : PROG
VCR Plus+ PROG. LIST
END : PROG
ENTER PLUSCODE NUMBER
USING 0 - 9 KEYS
BACKSPACE :
1
Press PROG/VCR+ button
again to exit.
• If the PlusCode number entered begins with “0,”
skip to step 5. Display in step 4 will not appear.
Press POWER off to set the timer.
(“TIMER” lights on Multi Function Display.)
Timer
Recording
*Important: If a remote control button does not work when pressed, press
the VCR button on the remote and try the button again.
• Press ADD/DLT
to delete the program.
VCR Plus+ PROG. LIST
SELECT :
END : PROG
DATE START STOP CH
SLP
SET:
CATEGORY : N/A
SELECT CATEGORY
13 SAT 2:20P 3:20P 02
TODAY ABC
ADD/DLT
NUMBER
keys
:PLAY
:STOP
:REW
:FF
POWER
SELECT/
SET
ACTION
PROG/
VCR+
A
C
T
IO
N
V
C
R
+