background image

20

Multi-Brand Control Feature

The Remote Control can be set to control some TV and
Cable box/DSS functions.

Find your TV and Cable Box/DSS Receiver Brand
Code Number on the following page.

Setup for TV control,
-->hold down TV button,
-->enter code with number keys.

Multi-Brand Control Setup

Confirm code entry,
-->press POWER to turn selected unit on or off.
• See table below for controllable functions in each mode.

Setup for Cable or DSS control,
-->hold down DSS/CABLE button,
-->enter code with number keys.

• If code number is 100 or greater,

-->press 100 key, then other digits.
E.g., press 100 - 0 - 2 for 102.

3

1

• Repeat setup after remote battery replacement.
• Remote will not control every TV, cable box, or

DSS made by the manufacturer listed. If you get
no response, your particular unit cannot be
controlled. There are NO additional codes for the
products listed. If your product is not listed, then
the remote is not compatible with that product.

Notes

2

Mode

Unit

VCR

TV

VCR

TV

All

VOL UP/DOWN

POWER, INPUT,
number  keys,
ENTER, CH
UP/ DOWN,
VOL UP/DOWN

VCR/TV, PLAY,
STOP EJECT,
SAP/ Hi-Fi,
DISPLAY, FF,
REW, PAUSE/
SLOW, REC,
SPEED,  CA/ZERO,
COUNTER RESET,
TAPE POSITION

After remote is set up, you can select VCR, TV, or DSS/
CABLE for the desired function.

Press VCR, or TV, or DSS/CABLE on the remote.
(Table below shows available unit buttons for each mode.)

CABLE/ DSS

Using Multi-Brand Control

CABLE/
DSS

VOL UP/ DOWN

Notes

POWER, ENTER,
number keys
(except 100key),
CH UP/ DOWN

• Not all functions listed may be controllable.
• In TV or DSS/CABLE mode, it may be necessary to press ENTER

after pressing number keys for channel selection.

DSS/
CABLE

NUMBER
keys

POWER

V

C

R

+

TV

ENTER

Содержание Omnivision PV-V4621












































































































































































Отзывы: