14
Oven Components Diagram
(continued)
NOTE:
The above illustration is for reference only.
Drip Tray
1. Before using the oven, the drip tray must be
fi
tted as it collects excess water during cooking. The drip tray should be
removed and cleaned on a regular basis.
2. Clean and wipe dry after use.
3. To remove the drip tray, hold with both hands and gently ease forward. Wash in warm soapy water.
4. After cleaning, re-connect the drip tray as shown in the diagram.
5. Fit the drip tray by holding with both hands and clicking onto the front legs of the oven, before using the oven.
6. DO NOT USE A DISHWASHER TO CLEAN THE DRIP TRAY.
Carefully remove the water tank from the oven. Remove
the lid and
fi
ll with tap water (do not use mineral water).
Replace the lid and position back in the oven. Ensure the
lid is closed tightly and securely positioned, otherwise
leakage may occur. It is recommended to clean the water
tank in warm water once a week. See page 12 for
reference.
Air Vents Exhaust
(Do not remove)
Rear View
Front View
Control Panel
Warning Label
Identi
fi
cation Plate
The model number and serial
number are displayed here.
Re-position the drip tray by clicking back onto the legs.
Water tank
lid
F0003BH71CP_OI_Eng_00_160121.indd sec14
F0003BH71CP_OI_Eng_00_160121.indd sec14
2016/1/22 9:13:58
2016/1/22 9:13:58