4
Moving and installing
(continued)
Moving the washing machine from one location to another
Make sure to fix the anchor bolts for transportation to the washing
machine.
Before you move the washing machine
● Shut the tap and run the washing machine to drain the water. Drain any remaining
water from the pump hose. (see page 28)
● Depressurise the water-supply hose and remove it.
● Disconnect the power cable.
● Attach the anchor bolts (see below).
Attaching the anchor bolts
Unscrew and remove the four cover caps.
Same level
Pull the bolts out, so their tips are level with the tips of the
sleeves.
( Ask someone else to hold the upper surface of the drum
and pull it forward.)
1
2
3
4
1
2
3
4
Insert the transportation guards 1, 2, 3 and 4.
B
Tighten each bolt.
26 mm
Tighten the bolt so that spring length becomes 26mm.
NA-168VX2_Eng.indb 34
2010-1-26 13:06:00