Installation
Instructions
Choosing the right location
Moving and installing
Moving and installing
Removing the anchor bolts
Four anchor bolts keep the interior of the washing machine in place while it’s being moved. They
need to be removed before installation, using the spanner supplied and following the instructions
below.
Don’t run the washing machine without removing the bolts, as this can
cause excessive vibration.
B
A
B
● To remove the anchor bolts:
Use the ‘B’ end of the spanner to loosen the
four bolts.
Pull the bolts out horizontally.
Remove the screws which are alongside the
bolt holes.
Push the four cover caps (included with your
accessories) onto the respective bolt holes,
and secure them with the screws you removed
in step
.
You’ll need the anchor bolts again if you move the washing machine, so
make sure you keep them safe. And if the washing machine passes to
someone else, make sure you give them the anchor bolts.
NA-168VX2_Eng.indb 33
2010-1-26 13:05:59