Canceling Registration/Re-registration
82
Re-registering the Handset
If you want to re-register the handset to the base unit or a different base unit of the
same model, you need to register it to that base unit. The handset will be given a new
extension number of that base unit. Only one handset can be registered at a time near
the base unit.
Make sure the base unit and the other handsets are not being
used. Have both the handset and base unit nearby during registration. Proceed
through the steps below within 1 minute.
•
You can stop registration by pressing
[OFF]
on the handset and pressing
[LOCATOR/INTERCOM/TRANSFER]
on the base unit.
If you have canceled handset registration at a previous base unit (p. 81), start
from step 5.
1
Press
[MENU]
.
2
Handset:
Scroll to “
Initial setting
” by
pressing
[
d
]
or
[
B
]
, then press the soft key
(
).
3
Handset:
Scroll to “
Registration
” by
pressing
[
d
]
or
[
B
]
, then press the soft key
(
).
4
Handset:
Press the soft key (
) at “
HS
registration
”.
5
Base unit:
Press and hold
[LOCATOR/INTERCOM/TRANSFER]
for 3 seconds.
•
The CHARGE indicator flashes.
6
Handset:
(1) Press the soft key (
).
(2) Wait until a long beep sounds and the
display shows the new extension number.
•
Registration is complete.
If you have not canceled the handset’s registration at the previous base unit
(p. 81), the handset number remains in that base unit’s memory. To erase the
handset number from the previous base unit, see the base unit’s Operating
Instructions. For the KX-TG5240 base unit: (1) Press and hold
[LOCATOR/
INTERCOM/TRANSFER]
for 3 seconds, and (2) Press and hold that handset
number (1 to 4) for 5 seconds.
Handset & Base Unit
SELECT
Initial setting
SELECT
Registration
SELECT
HS registration
O K
Press LOCATOR
on base unit
for 3 sec.
Then press OK
SP
I
PRIVACY
1
Handset [2]
Registered
IN USE
[2]
Ex. Extension number 2
