Useful Information
Answering System
T
e
lephone System
17
Programmable Settings
For assistance, please call: 1-800-211-PANA(7262)
Preparation
Date and Time
•
When entering the time, you cannot enter numbers greater than 12.
Do not use
military time.
(To set 13:00 hours, enter “0100”, and select “PM”
.)
To confirm the date/time,
repeat steps 1 and 2.
•
The current date/time is displayed. When finished, press
[OFF]
.
1
Press
[MENU]
.
2
Scroll to “
Date and time
” by pressing
[
d
]
or
[
B
]
, then press the soft key (
).
3
(1) Enter 2 digits each for month, day and
year. (Ex. To set May 15, 2004, enter
“05 15 04”.)
(2) Enter 4 digits for time (hour and minute).
(Ex. To set 9:30, enter “0930”.)
•
If you enter a wrong number, press the soft key
(
) or (
), or press
[
d
]
or
[
B
]
to move
the cursor to the incorrect number. Enter the
correct number.
4
Select “AM” or “PM” by pressing
[
*
]
.
5
Press the soft key (
).
•
The clock is set and “
E
” disappears from the base unit display.
•
If 3 beeps sound, the setting is not correct. Start again from step 3.
6
Press
[OFF]
.
The displayed time may be incorrect after a power failure. When “
E
” flashes on
the base unit display, adjust the date/time.
For Caller ID service users (p. 32)
•
When a call is received, Caller ID information adjusts the date/time if the time is
incorrect.
•
Caller ID information will automatically adjust the clock for daylight saving time.
•
If the date/time has not been previously set, Caller ID information will not adjust
the date/time.
Handset
SELECT
B
Date and time
d
BACK
P LAY
SELECT
f
g
Date:
|
12.31.2004
Time:12:00 AM
0-9=Date&Time
@
=AM/PM
f
g
SAVE
Date:05.15.2004
Time:09:30
|
|
A
|
|
M
0-9=Date&Time
@
=AM/PM
f
g
SAVE
SAVE
