Panasonic KXTG5243 - KXTG5240M TOT 3 H/S страница 67 Скачать руководство пользователя

Страница: 67 / 104

Useful Information

Answering System

Preparation

Listening to Messages

For assistance, please call: 1-800-211-PANA(7262)

lephone System

Using the Handset (Remote Operation)

If “

” flashes, there are new messages. If there are only old messages

“

” is displayed but will not flash.

To play back messages

•

If you do not select a mailbox in step 2, new messages in Mailbox 1 will be played.

•

“

” will remain on the display after listening to messages.

•

You can switch to another mailbox by pressing

[#]

and the mailbox number (

[1]

[3]

) during the remote operation.

•

If a call is received during playback, the unit rings and playback stops. To answer
the call, press

[

]

[

]

. For playback, start again from the beginning after

hanging up.

•

At the end of the last message, “

End of final message

” is heard. The unit will

announce the remaining recoding time if it is less than 3 minutes.

•

If you hear “

Memory full

” after playback, erase unnecessary messages (p. 69).

Press the soft key (

)

•

A beep sounds and “

Please select Mailbox

” will be

heard from the speaker. To switch to the
receiver, press

[

]

. To switch back to the

speaker, press

[

]

•

The icons for mailboxes that have new
messages will flash.

Press the soft key (

•

If “

Enter Mailbox password

” is announced and

displayed, Mailbox 2 or 3 has a password. Enter
the password (p. 64).

•

“

Mailbox (No.)

” and the number of new

messages will be announced, and new
messages will be played.

•

When the mailbox has no new messages, the
unit announces “

Mailbox (No.)

” and “

No new

messages. All message playback

”, and plays back

all messages in the mailbox.

•

To play all messages in the mailbox, press

[5]

•

If you do not press any buttons, the voice menu
will start (p. 68).

To end remote operation, press

[OFF]

Handset

PLAY

7 missed calls

C I D

P LAY

Ex. New messages exist.

BOX 1

BOX 2

BOX 3

Remote operation

BOX 1

BOX 2

BOX 3

Ex. Mailbox 1 has new

messages.

PLAY

Содержание KXTG5243 - KXTG5240M TOT 3 H/S









































































































Результаты поиска

Содержание KXTG5243 - KXTG5240M TOT 3 H/S

Отзывы:

Похожие инструкции для KXTG5243 - KXTG5240M TOT 3 H/S

Бренды по названию

Популярные бренды

Panasonic KXTG5243 - KXTG5240M TOT 3 H/S, Руководство по эксплуатации

Результаты поиска

Содержание KXTG5243 - KXTG5240M TOT 3 H/S

Отзывы:

Похожие инструкции для KXTG5243 - KXTG5240M TOT 3 H/S

Бренды по названию

Популярные бренды