Useful Information
Answering System
T
e
lephone System
25
Preparing the Answering System
For assistance, please call: 1-800-211-PANA(7262)
Preparation
Number of Rings
You can select the number of times the unit rings before the Answering System
answers a call, from “2” to “7” or “Toll saver”*. The factory preset is “4”.
4
Scroll to “
Recording time
” by pressing
[
d
]
or
[
B
]
, then press the soft key (
).
5
Select the recording time by pressing
[
d
]
or
[
B
]
.
•
You can also select the recording time by
pressing
[1]
,
[2]
,
[3]
, or
[0]
(Greeting only).
6
Press the soft key (
), then press
[OFF]
.
If you select “
Greeting only
”, the unit will answer a call with the greeting
message, and then hang up. The unit will not record any incoming messages.
The base unit will display “
” instead of the number of messages.
1
Follow steps 1 to 3 of “Caller’s Recording Time” on page 24.
2
Press the soft key (
) at “
Number of
rings
”.
3
Select the number of rings by pressing
[
d
]
or
[
B
]
.
•
You can also select the number of rings by
pressing
[0]
(Toll saver*), or
[2]
to
[7]
.
4
Press the soft key (
), then press
[OFF]
.
*Toll saver
When you call the unit from a remote location, the number of rings will tell you if
there are any new messages. If the unit answers on the 2nd ring, there is at least
one new message. If the unit answers on the 4th ring, there are no new
messages. To save the toll charges for the call, hang up immediately when you
hear the 3rd ring. The 3rd ring indicates that there are no new messages.
SELECT
Recording time
Recording time
:3min
SAVE
Handset
SELECT
Number of rings
Number of rings
:4
SAVE
