background image

Problem

Cause & Solution

While programming, the
cordless handset starts to
ring.

R

A call is being received. Answer the call and start again after hanging up.

 is flashing.

R

The cordless handset is not registered to the base unit. Register it
(page 50).

R

The cordless handset is too far from the base unit. Move closer.

R

The mains lead is not connected. Check the connections.

R

You are using the cordless handset or base unit in an area with high
electrical interference. Re-position the base unit and use the cordless
handset away from sources of interference.

The cordless handset does
not ring.

R

The ringer volume is turned OFF. Adjust it (page 21).

Static, sound cuts in/out,
fades. Interference from other
electrical units.

R

Place the cordless handset and the base unit away from other electrical
appliances.

R

Move closer to the base unit.

Noise is heard, sound cuts in
and out.

R

You are using the cordless handset or base unit in an area with high
electrical interference. Re-position the base unit and use the cordless
handset away from sources of interference.

R

Move closer to the base unit.

R

If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL
filter between the base unit and the telephone line jack. Contact your DSL/
ADSL provider for details.

The cordless handset beeps
and/or   flashes.

R

Battery charge is low. Fully charge the batteries (page 21).

I fully charged the batteries,
but   still flashes.

R

Clean the charge contacts and charge again (page 21).

R

It is time to replace the batteries (page 18).

I fully charged the batteries,
but the operating time seems
to be shorter.

R

Clean the battery ends ( ,  ) and the charge contacts with a dry cloth and
charge again.

I cannot make calls with the
cordless handset.

R

The cordless handset is too far from the base unit. Move closer and try
again.

R

Another unit is in use. Wait and try again later.

R

The key lock feature is turned ON. Turn it OFF (page 24).

The name stored in the
phonebook is not fully
displayed while an outside
call is being received.

R

Edit the phonebook item name to fit in 1 line of text (page 25).

I cannot register a cordless
handset to a base unit.

R

The maximum number of cordless handsets are already registered to the
base unit. Cancel unused cordless handset registrations from the base unit
(page 50).

R

You entered the wrong PIN. If you forget your PIN, consult your nearest
Panasonic service centre.

R

Place the cordless handset and the base unit away from other electrical
appliances.

60

10. Help

Содержание KXFC265E













































































Отзывы: