Problem
Cause & Solution
The printing quality is poor.
Please do not reuse the ink film!
Please use genuine Panasonic replacement film. Refer to page 11 for further
details.
R
The thermal head is dirty. Clean it (page 66).
R
If documents can be copied properly, the unit is working normally. The other
party may have sent a faint document or there may be something wrong
with the other party’s machine. Ask them to send a clearer copy of the
document or to check their fax machine.
R
Some paper has instructions recommending which side to print on. Try
turning the recording paper over.
R
You may have used paper with cotton and/or fibre content that is over 20%,
such as letterhead or resume paper.
Recording paper frequently
misfeeds.
R
Clean the document feeder rollers, recording paper feeder and rubber flap
(page 65).
Letters on the received
document are distorted.
R
If your line has special telephone services such as call waiting, the service
may have been activated during fax reception. Connect the unit to a line that
does not have these services.
I cannot receive documents
using the cordless handset.
R
The memory is full of received documents due to a lack of recording paper,
a lack of ink film or a recording paper jam. Install paper (page 17), install ink
film (page 15) or remove the jammed paper (page 64).
When an extension telephone
is connected, I cannot receive
documents by pressing
MGNMBNM
9
N
.
R
You must set remote fax activation to ON (feature #41 on page 45)
beforehand.
R
You may have changed the remote fax activation code from
MGNMBNM
9
N
(default setting). Verify the remote fax activation code (feature #41 on
page 45).
R
The memory is full of received documents due to a lack of recording paper,
a lack of ink film or a recording paper jam. Install paper (page 17), install ink
film (page 15) or remove the jammed paper (page 64).
The other party complains
that they cannot send a
document.
R
The receiving mode is set to TEL mode. Receive the document manually
(page 33) or change the receiving mode to TAM/FAX mode (page 34), FAX
ONLY mode (page 35) or TEL/FAX mode (page 33).
R
The memory is full of received documents due to a lack of recording paper,
a lack of ink film or a recording paper jam. Install paper (page 17), install ink
film (page 15) or remove the jammed paper (page 64).
I cannot select the desired
receiving mode.
R
If you want to set TAM/FAX or FAX ONLY mode:
– select the desired mode using feature #77 (page 46), and press
M
AUTO
ANSWER
N
repeatedly until the desired mode is displayed.
R
If you want to set TEL mode or TEL/FAX mode:
– select the desired mode using feature #73 (page 46), and press
M
AUTO
ANSWER
N
repeatedly until the desired mode is displayed.
10.3.6 Copying
Problem
Cause & Solution
The unit will not make a copy.
R
The ink film is empty. Replace the ink film with a new one (page 15).
R
You cannot make a copy during programming.
R
You cannot make a copy during a telephone conversation.
A black line, white line or
smudge appears on the
copied document.
R
The scanner glass or rollers are dirty with correction fluid, etc. Clean them
(page 65). Please do not insert a document before correction fluid has
dried completely.
The copied image is distorted.
R
Adjust the width of the document guides to fit the actual size of the
document.
62
10. Help
Содержание KXFC265E
Страница 74: ...74 Notes ...
Страница 75: ...75 Notes ...