Panasonic KX-TVA50, Руководство по установке

Страница: 98 / 208

2.
Assignment of VM (DPT) extension ports
a.
Go to the Configuration-Extension Port screen. Follow the procedure below for the extension port
which you want to assign as a VM port.
b.
Set the port’s Connection to OUS .
c.
Select the attribute of DPT Property-Type to VM (DPT) .
d.
Assign DPT Property-VM Unit No. and DPT Property-VM Port No. . Incoming calls will hunt starting
at the lowest VM Port number.
e.
Click Apply to save the changed data.
f.
Set the port’s Connection to INS .
3.
Program the appropriate trunk (CO line) feature settings depending on how your customer plans to use
the VPS.
•
The VPS answers all incoming trunk (CO line) calls promptly.
See Example Settings (1) later in this section.
•
The VPS answers when the operator does not take the call after a specified time.
See Example Settings (2) later in this section.
•
The VPS answers when an Incoming Call Distribution (ICD) group does not take the call after a
specified time.
See Example Settings (3) later in this section.
4.
Make sure all installation and line connections have been done as described in Section 2 Installation.
5.
Connect the jack assigned in Step 2 to the VPS.
6.
Complete the PBX-VPS connection by following from step 1 of 4.7 Completing the PBX-VPS
Connection.
98 Installation Manual Document Version 3.0 2010/06
4.2 KX-TDE, KX-TDA, and KX-TAW Series PBX Programming for DPT Integration