Panasonic KX-TD500, Руководство по установке

Страница: 261 / 316

Utility
Installation Manual 261
#1203 SMDR Not Connect SMDR disconnects for the following reasons.
a)
RS-232C cable is not connected.
b)
RS-232C cable is defective.
c)
Printer is turned off. (including out of paper)
#1300 Echo back error No answer from the card when the PBX executed Echo
Back test.
#1301 LPR ROM failure LPR ROM checksum error occurred.
#1302 LPR RAM failure LPR RAM failure occurred.
#1303 Card disconnect Card disconnects because of card connection error or
defective CPU card.
#1304 LPR modem failure LPR modem failure occurred.
#1306 LPR memory checksum
error LPR memory checksum error occurs because of defective
LPR RAM.
#1307 LPR runaway LPR runaway occurs when the LPR software executed
illegal instruction.
#1308 Card start up error (Reset
Notice) The PBX could not reset the card properly.
#1309 Card start up error (Sync
Ans) The PBX synchronized with the card in vain.
#1310 Card start up error (Card
Kind) The PBX received illegal card type from the card.
#1311 Card start up error
(Download) The PBX received data downloading error from the card.
#1312 Card start up error (System
Start) The PBX received start-up error from the card.
#1313 DISA OGM CPU runaway Runaway of the OGM (CPU) of the DISA card occurred.
#1314 DISA OGM lost DISA OGM lost occurs for the following reasons.
a)
Power failure or power-off for long duration (6-7
days)
b)
Defective backup battery for DISA card
c)
OGM was not recorded after the installation.
#1316 OPX power down OPX power down occurs because of power-off of
external OPX Power Unit, or defective OPX card.
#1317 OPX bell power down OPX bell power down occurs because of power-off of
external OPX Power Unit, or defective OPX card.
Error Log (Minor)
Error Code Error Message Cause