Useful Information
34
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect the AC adaptor and
turn off the handset, then reconnect the AC adaptor and turn on the handset.
Initial settings
Problem
Cause & solution
w
is flashing.
L
The handset is not registered to the base unit. Register it
(Seite 28).
L
The handset is too far from the base unit. Move closer.
L
The AC adaptor is not connected. Check the
connections.
The handset display is blank.
L
The handset is not turned on. Turn the power on (Seite 9).
The handset will not turn on.
L
Make sure that the batteries are installed correctly (Seite
8).
L
Fully charge the batteries (Seite 8).
L
Clean the charge contact and charge again (Seite 8).
TCD200G(e-g).book Page 34 Tuesday, February 8, 2005 8:57 AM
Содержание KX-TCD200G
Страница 38: ...Useful Information 38 Guarantee TCD200G e g book Page 38 Tuesday February 8 2005 8 57 AM ...
Страница 39: ...Useful Information 39 Free Troubleshooting TCD200G e g book Page 39 Tuesday February 8 2005 8 57 AM ...
Страница 42: ...42 TCD200G e g book Page 42 Tuesday February 8 2005 8 57 AM ...
Страница 43: ...43 TCD200G e g book Page 43 Tuesday February 8 2005 8 57 AM ...