Panasonic KX-TCD200G, Руководство по эксплуатации

Страница: 30 / 44

Multi-unit Operation
30
L
If you changed the PIN, enter it (Seite 25).
4
Select “
Andere Optionen
” , then press
{>}
.
5
Select “
Wiederholmodus
” , then press
{>}
.
6
Select “
Ein
” or “
Aus
” , then press
{>}
.
7
Press
{ih}
.
Hinweis:
L
After turning repeater mode on/off, you will not
be able to make or receive calls for a few
moments.
Intercom between handsets
Intercom calls can be made between handsets in
the same radio cell, but not between handsets in
different radio cells.
Beispiel: When handset 1 calls handset 2
1
Handset 1:
Press
{
INT
}
and
{
2
}
(desired handset
number).
2
Handset 2:
Press
{C}
or
{s}
to answer.
3
When finished talking, press
{ih}
.
Transferring calls between
handsets
Outside calls can be transferred between 2
handsets in the same radio cell.
Beispiel: When handset 1 transfers a call to
handset 2
1
Handset 1:
During an outside call, press
{
INT
}
and
{
2
}
(desired handset number).
L
The outside call will be put on hold.
L
If there is no answer, press
{
INT
}
to return
to the outside call.
2
Handset 2:
Press
{C}
or
{s}
to answer the page.
L
Handset 2 can talk with handset 1.
3
Handset 1:
To complete the call transfer, press
{ih}
.
Transferring a call without speaking to the
other handset user
1
During an outside call, press
{
INT
}
, then
press the desired handset number.
L
The other handset rings if it is within range
of the base unit and turned on.
2
Press
{ih}
.
L
The outside call rings at the other handset.
Hinweis:
L
k
flashes to indicate the outside call is on
hold.
L
If the other handset user does not answer the
call within 1 minute, the call will ring at your
handset again.
TCD200G(e-g).book Page 30 Tuesday, February 8, 2005 8:57 AM