Panasonic KX-TCD200G, Руководство по эксплуатации

Страница: 17 / 44

Handset Settings
17
Time settings
Alarm
An alarm will sound for 3 minutes at the set time
once or daily. Set the date and time beforehand
(Seite 9).
1
Press
{j
/OK
}
.
2
Select “
Mobilteileinst.
” , then press
{>}
.
3
Select “
Zeiteinstell.
” , then press
{>}
.
4
Select “
Alarm
” , then press
{>}
2 times.
5
Select an alarm mode, then press
{>}
.
– “
Einmalig
” : The alarm will sound once
at the set time. Enter the desired day and
month by selecting 2 digits for each.
– “
TäglWiederholen
” : An alarm will
sound daily at the set time.
– “
Aus
” : Turns the alarm off. Press
{>}
again, then press
{ih}
to finish.
6
Enter the desired hour and minute by
selecting 2 digits for each.
L
You can select “
AM
” , “
PM
” or 24-hour time
entry by pressing
{*}
repeatedly.
7
Press
{j
/OK
}
.
8
Select the ringtone that will sound at the set
time, then press
{>}
.
9
Select “
Speichern
” , then press
{>}
.
10
Press
{ih}
.
Hinweis:
L
To stop the alarm, press any dial key.
L
When in talk or intercom mode, the alarm will
not sound until the call has ended.
L
The alarm will sound at the set time even when
the ringer volume is turned off.
L
If you select “ Einmalig ” , the setting will
change to “
Aus
” after the alarm sounds.
Ringer setup
Ringer volume
1
Press
{j
/OK
}
.
2
Select “
Mobilteileinst.
” , then press
{>}
.
3
Select “
Ruftoneinstell.
” , then press
{>}
.
4
Select “
Ruflautstärke
” , then press
{>}
.
5
Press
{e}
or
{v}
repeatedly to select the
desired volume.
6
Press
{>}
.
7
Press
{ih}
.
Hinweis:
L
Alarms will sound and the handset will ring for
intercom calls and when paged even if the
ringer is turned off.
Changing ringtones
You can change the ringtone used by the
handset.
“
Rufsignal ext.
” : Selects the ringtone for
outside calls.
“
Rufsignal int.
” : Selects the ringtone for
intercom calls.
1
Press
{j
/OK
}
.
2
Select “
Mobilteileinst.
” , then press
{>}
.
3
Select “
Ruftoneinstell.
” , then press
{>}
.
4
Select the desired item, then press
{>}
.
5
Select the desired ringtone, then press
{>}
.
6
Press
{ih}
.
Hinweis:
L
If you select one of the melody ringtones, the
ringtone will continue to sound for several
seconds if the caller hangs up before you
answer. You may hear a dial tone or no one on
the line when you answer a call.
L
The preset melodies in this product are used
with permission of © 2004 M-ZoNE Co., Ltd.
Night mode
Night mode allows you to select a block of time
during which the handset will not ring for outside
calls. This feature is useful for times when you do
not want to be disturbed, for example, while
TCD200G(e-g).book Page 17 Tuesday, February 8, 2005 8:57 AM