Panasonic KX-TCD200G, Руководство по эксплуатации

Страница: 8 / 44

Preparation
8
Battery installation
1
Insert the batteries negative (
T
) terminal
first.
2
Close the handset cover.
Hinweis:
L
Use only rechargeable batteries (Seite 4).
Battery charge
Place the handset on the base unit for about 7
hours before initial use.
When charging, the battery icon is shown as
follows.
When the batteries are fully charged,
5
remains on the display.
Hinweis:
L
It is normal for the handset to feel warm during
charging.
L
It takes 7 hours to fully charge the batteries,
however, you can use the handset before the
batteries are fully charged.
L
Clean the charge contacts (Seite 6) of the
handset and base unit with a soft, dry cloth
once a month, otherwise the batteries may not
charge properly. Clean more often if the unit is
exposed to grease, dust or high humidity.
Battery strength
Hinweis:
L
When
7
flashes, recharge the handset
batteries.
7
will continue to flash until the
batteries have been charged for at least 15
minutes.
L
If the handset is turned off, it will be turned on
automatically when it is placed on the base
unit.
Battery icon Battery strength
5
High
6
Medium
7
Low
When flashing: Needs to
be charged.
TCD200G(e-g).book Page 8 Tuesday, February 8, 2005 8:57 AM