Panasonic KX- TAW848, Руководство по функциям

Страница: 249 / 584

4.5 Utility
Feature Guide 249
4.5 Utility
4.5.1 Utility—Diagnosis
Performs diagnostic tests on cards installed in the PBX, to ensure that they are operating correctly. The tests
carried out vary according to the type of card being tested.
If any of the tests listed here returns the result "NG" ("No Good"), contact your dealer. Test results can be
saved, as a TXT-format (text) file.
When testing is complete, any cards that were set to OUS status must be returned to INS status if they are
to be used again.
The tests that are performed on each card are as follows:
A check mark indicates that the test is available for that card.
To perform a card test
1.
From the Utility menu, select Diagnosis .
2.
Click on the Status cell of the card to be tested, and set it to "OUS".
To perform the EXT-CID path test, set the status of both the EXT-CID card and the card in slot 1 to
"OUS".
3.
Click on the cell showing the card type.
A new window will be displayed.
4.
Select the Card Test option.
A new window will be displayed.
5.
Click OK to perform the test(s).
The error report will be displayed. When all tests are completed, the words "Test End!" will be shown
on the last line of the output.
6.
Select an option:
• Click Capture if you want to save the displayed information.
1.
Enter a file name, or select a file to overwrite.
2.
Click Save .
• Click Cancel to return to the Diagnosis screen.
SL
C
8
HLC4 PL
C
4
PL
C
8
LCO
T
4
EC
H
O
8
MS
G
2
DP
H4
EX
T
-C
ID
Local loop back diagnosis
Card CT Bus diagnosis
DTMF Receive test port
MSG Card DTMF receive
test
EXT-CID path test