Panasonic KX-TA616, Руководство по установке, Страница: 58 / 246

3-8 Features
C
3 Features
Call Transfer – to Extension
Allows an extension user to transfer a received call, an intercom or an outside call, to
another extension. Two types are available.
Screened Call Transfer: Announces the call to another extension before completing
the transfer.
Unscreened Call Transfer:Immediately releases the call to another extension without an
announcement.
• If the destination extension does not answer the call within the assigned time in program
[201], the call will return to the transferring party.
• An outside call can be transferred to an extension by simply pressing a DSS button. It
requires program [005].
• If Music on Hold is enabled, music is sent to the original external caller while being
transferred. Sending a cyclic tone or music on hold can be programmed by program
[111].
• During a 5-party conference, the user cannot transfer a call.
• Required System Programming
[005] One-Touch Transfer Using a DSS Button
[111] Hold Music Selection
[201] Transfer Recall Time
• Related Feature References
Conference (5-party), Hold, Music on Hold
• Operating Instructions Reference
1.5 During Conversation, “Transferring a Call to an Extension (Call Transfer – to
Extension)”
!
!
☞
Allows an extension user enabled in program [606] to transfer a received call, an intercom
call or an outside call, to an external party.
• If a call between 2 external parties is established using this feature, an alarm tone will be
sent to both parties 15 seconds before the assigned time limit in program [205]. Also, a
ring tone or an alarm tone will be sent to the extension who transferred the call
50 seconds before the timeout. The call will be disconnected at the timeout unless the
extension joins the conversation again.
• A single line telephone user cannot transfer a received call to an external party.
• If Music on Hold is enabled, music will be sent to the original external caller while being
transferred. Sending a cyclic tone or music on hold can be programmed by program
[111].
Call Transfer – to Outside (CO) Line
!
!