manualshive.com logo in svg

Panasonic KX-TA616, Руководство по установке, Страница: 113 / 246

Поделиться
Скачать
Panasonic KX-TA616 Скачать руководство пользователя страница 113

Features

3-63

3

Features

U

*1: An OGM is sent to the caller.

When the system detects a cyclic tone or CPC signal while the OGM is being sent, the
call is disconnected.

*2: Music on hold is selected in program [111] as follows.

• External – Uses an external music source, such as radio.
• Internal – Uses the internal music source equipped with the system.
• Tone – 

Uses the cyclic tone equipped with the system.

*3: When an extension in the UCD group is available.
*4: The system holds the call until the assigned time in program [521] expires.
*5: OGM repeats the assigned time intervals in program [522] within the assigned time in

program [521].

*6: The other OGM (OGM2) is selected in program [502].
*7: The system treats the call according to program [523] as follows when the assigned time

in [521] expires.

• Disconnect – the call is disconnected.
• Intercept –

the call is sent to the extensions programmed in [408]-[410].

*8: The system treats the call according to program [524] as follows when the assigned time

in [525] expires.

• Disconnect – the call is disconnected.
• Intercept –

the call is sent to the extensions programmed in [408]-[410].

*9: If the caller did not hear an OGM, the call will not be disconnected until the caller goes

on-hook.

*10: The UCD Ring Timer After Intercept starts. The destination telephone(s) will ring for

the time programmed in program [526].  If the call is not answered during the
programmed time, the call will be disconnected.

Содержание KX-TA616























































































































































































































































Отзывы:

Нет отзывов