manualshive.com logo in svg

Panasonic KX-TA616, Руководство по установке, Страница: 168 / 246

Поделиться
Скачать
Panasonic KX-TA616 Скачать руководство пользователя страница 168

4-50

System Programming

[502]

4.2

System Programming

Selects how the 2 outgoing messages (OGM1 and OGM2) are used, MODE1 through
MODE5.

Default

MODE1

• Programs [414]-[416] “Outside (CO) Line Mode – Day/Night/Lunch” are used to assign

“DISA1”, “DISA2” or “UCD” to each outside (CO) line according to this assignment.
UCD-END is used automatically when UCD is assigned in programs [414]-[416],
“Disconnect” is selected in program [523] “UCD Busy Mode”, and “MODE4” is selected
in this program.

• If the optional OGM/FAX Detection card is not installed, this assignment should be

“MODE1”.

• Feature References

Section 3, Features

Direct Inward System Access (DISA), Outgoing Message (OGM),
Uniform Call Distribution (UCD)

Mode

1

2

3

4

5

[502] OGM Mode Selection

!

!

0

5

NEXT

2

STORE

END

SELECT

(MODE 1/

2/3/4/5)

OGM1 

DISA1

DISA1

UCD

UCD

UCD

OGM2 

DISA1 

DISA2

UCD

UCD-

END

DISA1

Description

The system can receive 2 incoming calls via the DISA feature
at the same time.  This is useful when receiving many calls.

An example: DISA1 is used in the day mode and DISA2 is
used in the night mode.

The system can hold up to 2 incoming calls via the UCD
feature at the same time until any extension is available.

The system disconnects an incoming call via the UCD feature
when the assigned waiting time in [521] “UCD Busy Waiting
Time” expires.

An example: UCD is used in the day mode and DISA1 is used
in the night mode.

☞

Содержание KX-TA616























































































































































































































































Отзывы:

Нет отзывов