manualshive.com logo in svg

Panasonic KX-TA616, Руководство по установке, Страница: 212 / 246

Поделиться
Скачать
Panasonic KX-TA616 Скачать руководство пользователя страница 212

6-4

Troubleshooting

6.3

While Operating

PROBLEM

PROBABLE CAUSE

POSSIBLE SOLUTION

When using the
speakerphone with a
proprietary telephone,
KX-T7030, KX-T7130,
KX-T7330 or 
KX-T7033, nothing is
heard.

The unit does not ring.

During a power failure,
the extension connected
to jack number 01 or 09
does not operate.

Making an outside call
cannot be performed.

A tone type single line
telephone (SLT) user
cannot make a call.

The HANDSET/HEADSET
selector on the KX-T7030, 
KX-T7130, KX-T7330 or
KX-T7033 is set to the
“HEADSET” position.

The Ringer Volume
Selector is set to “OFF”.

A proprietary telephone is
connected to the jack.

The corresponding CO
button does not exist on the
proprietary telephone.

There may be something
wrong with a DTMF
receiver.

When the headset is not used, set the
HANDSET/HEADSET selector to the
“HANDSET” position.

Set to “HIGH” or “LOW”.

Disconnect the proprietary telephone
and connect a single line telephone.

Program the CO button.  See the
Flexible Button Assignment.
(

☞

Operating Instructions, 
1.2 Proprietary Telephone Settings,
“Customizing the Buttons on Your
Telephone”)

1. Select “Enable” for DTMF receiver 1

and “Disable” for DTMF receiver 2 in
program [107].

2. Make a call using a tone type SLT

connected to one of extension jacks
01–08.

3. If you cannot make the call, the

problem may have been caused by
DTMF receiver 1.  If the call can be
made, go to step 4.

4. Try DTMF receiver 2.  Select

“Disable” for DTMF receiver 1 and
“Enable” for DTMF receiver 2 in
program [107], and make another call.
If you cannot make the call, the
problem may have been caused by
DTMF receiver 2.  If the call can be
made, go to step 5.

5. Check the other 4 DTMF receivers in

the same way.  Refer to program
[107].

Содержание KX-TA616























































































































































































































































Отзывы:

Нет отзывов