manualshive.com logo in svg

Panasonic KX-TA616, Руководство по установке, Страница: 33 / 246

Поделиться
Скачать
Panasonic KX-TA616 Скачать руководство пользователя страница 33

2.14

Location of Optional Cards

Installation

2-17

The location of the optional cards is shown below.

Precaution

To protect the printed circuit boards (P-boards) from static electricity, do not
touch parts on the P-boards in the main unit and on the optional cards.  If
accessing the parts is required, wear a grounding strap.

OGM/Fax Detection Card (KX-TA30891) 
Connector

3-CO Line and 8 Ext
Expansion Card
(KX-TA30877) or
8 SLT Extension Expansion 
Card (KX-TA30874)
Connector

The front covers are open.

Doorphone/Door Opener Card
(KX-TA30860) Connector

2.15

OGM/FAX Detection Card Installation

An optional OGM/FAX Detection Card (KX-TA30891) can be installed to the system.

The OGM/FAX Detection Card supports the following.

Direct Inward System Access (DISA) with OGM:

One of the system features.  An outgoing message greets the external caller and gives
information so that the caller can access an extension(s) directly.

Facsimile detection:

When the system receives a facsimile transmission signal by DISA, it automatically
connects the specified facsimile extension.

1. Loosen the 2 screws.

Screws

* The illustrations on this page are a KX-TA308.

Содержание KX-TA616























































































































































































































































Отзывы:

Нет отзывов