Settings and Printing
Maintenance
Specifications
22
6
Compare the current color density settings on the Color Calibration Page with
the color density samples on the Color Calibration Card to see if they match.
Place the Color Calibration Page on at least 2 sheets of clean white paper in a well-lighted
area.
B
If they match, then you do not need to adjust the color density and you may proceed with
any operation you wish to perform.
B
If they do not match, go to the next step.
7
Determine which block on the Color Calibration Page most closely matches
the density of the cyan sample on the Color Calibration Card.
B
Repeat this step for each color.
8
Proceed to “
Adjusting the Density for All Colors Simultaneously
” or “
Adjusting
the Density for Each Color Independently
”.
Color Calibration
Card
Adjusting the Color Density
Color Calibration Page
Clean white paper