Panasonic KX-P7105 Скачать руководство пользователя страница 309

Страница: 309 / 312

Settings and Printing

Network

Maintenance and Spec.

Appendix

Settings and Printing

Network

Maintenance and Spec.

124

■

NetWare

Primary Server

0.0.0.0

Sets WINS server (primary) address. The
Computer Name of the NetBEUI/NetBIOS
is used for NETBIOS name

Secondary Server

0.0.0.0

Sets WINS server (secondary) address.
The Computer Name of the NetBEUI/
NetBIOS is used for NETBIOS name

Scope ID

NULL

Sets Scope IP.

name

Factory Default

Description

Use NetWare Protocol

ENABLE

Enables or disables NetWare printing.

Frame Type

802.2

Sets default Frame type used by KX-
P7110. If KX-P7110 does not work with
the frame type, it will be automatically
changed to different type.

Printer Name

KXPxxxxxx-
Printer

Sets printer name which is registered to
NetWare server. This name must be the
same as the printer name registered to
NetWare server.

Operation Mode

PSERVER

Sets operation mode (PSERVER or
RPRINTER). If KX-P7110 does not work
with the operation mode, it will be
automatically changed to diffrerent mode.

PSERVER Mode

ENABLE

Enables or disables Print Server mode.

Print Server Name

KXPxxxxxx

Sets print server name for PSERVER
mode.

Password

NULL

Sets the password to login to the file
server.

Name

Factory Default

Description

Содержание KX-P7105

























































































































































































































































































































Результаты поиска

Содержание KX-P7105

Отзывы:

Panasonic KX-P7105, Руководство по эксплуатации, Страница: 309 / 312

Результаты поиска

Содержание KX-P7105

Отзывы: