manualshive.com logo in svg

Panasonic KX-P7105, Руководство по эксплуатации, Страница: 265 / 312

Поделиться
Скачать
Panasonic KX-P7105 Скачать руководство пользователя страница 265

Settings and Printing

Network

Network

Maintenance and Spec.

Setup in NetWare

Settings and Printing

Network

Network

Maintenance and Spec.

80

■

Using NDS - PSERVER mode:

The following is the steps for setting up the printer. First install the Network Setup Tool from
the printer CD-ROM and then set up the printer.

1

Start the server system.

2

Start the client system and login into the network in the NDS mode.

•If the Network Setup Tool is already installed, click 

, move the pointer to

Programs, Panasonic and Panasonic KX-P7105 and KX-P7110, then click
Network Setup Tool. Proceed to step 7.

3

Insert the printer CD-ROM into the CD-ROM drive.

The CD-ROM launches automatically.

NOTE

• If the CD-ROM does not launch automatically, perform the following steps (1) – (2).

(1)Double click My computer icon.
(2)Double click the CD-ROM icon.

4

Click KX-P7110.

Start

Содержание KX-P7105

























































































































































































































































































































Отзывы:

Нет отзывов