manualshive.com logo in svg

Panasonic KX-P7105, Руководство по эксплуатации, Страница: 216 / 312

Поделиться
Скачать
Panasonic KX-P7105 Скачать руководство пользователя страница 216

Settings and Printing

Network

Network

Maintenance and Spec.

Setup in Windows

Settings and Printing

Network

Network

Maintenance and Spec.

31

■

Step 3: Installing IPP Port on the computer

This step explains how to install IPP Port monitor for KX-P7110 Network Printer Port. 
Before installation, confirm that the printer is connected to the network correctly and is ready
status.

1

Insert the printer CD-ROM into the CD-ROM drive.

The CD-ROM launches automatically.

NOTE

• If the CD-ROM does not launch automatically, perform the following steps (1) – (2).

(1)Double click My computer icon.
(2)Double click the CD-ROM icon.

2

Click KX-P7110.

3

Click Install Network Port.

Содержание KX-P7105

























































































































































































































































































































Отзывы:

Нет отзывов