Panasonic KX-P7105 Скачать руководство пользователя страница 136

Страница: 136 / 312

Cleaning the Printer

Settings and Printing

Network

Maintenance and Spec.

Periodic cleaning of the printer is recommended. The frequency of cleaning is dependent
upon the environment in which the printer is used.

You should clean the printer:
• at least once a month.
• when you replace the toner cartridge.
• when print quality has deteriorated.

CAUTION

• Do not use benzene, thinner, aerosol cleaners, or any abrasive powder.

Turn the power OFF.

Clean all the covers with a soft cloth. Use any mild commercial cleaner.

Turn the power off and remove the power cord for your safety.

Remove the media tray out of the printer.

Cleaning the Printer

External

Internal

Содержание KX-P7105

























































































































































































































































































































Результаты поиска

Содержание KX-P7105

Отзывы:

Panasonic KX-P7105, Руководство по эксплуатации, Страница: 136 / 312

Результаты поиска

Содержание KX-P7105

Отзывы: