Panasonic KX-P7105 Скачать руководство пользователя страница 220

Страница: 220 / 312

Settings and Printing

Network

Maintenance and Spec.

Setup in Windows

Settings and Printing

Network

Maintenance and Spec.

■

Step 4: Setting up the printer driver and the printer port on the

computer

If the printer driver is already installed on your computer, see

page 37

■

If the printer driver is not installed,

First install the printer driver, then set up the printer port as follows:

Insert the printer CD-ROM into the CD-ROM drive.

The CD-ROM launches automatically.

Note:

• If the CD-ROM does not launch automatically, perform the following steps (1) – (2).

(1)Double click My computer icon.
(2)Double click the CD-ROM icon.

Click KX-P7110.

Click Install Printer driver and Utilities.

Содержание KX-P7105

























































































































































































































































































































Результаты поиска

Содержание KX-P7105

Отзывы:

Panasonic KX-P7105, Руководство по эксплуатации, Страница: 220 / 312

Результаты поиска

Содержание KX-P7105

Отзывы: