manualshive.com logo in svg

Panasonic KX-P7105, Руководство по эксплуатации, Страница: 130 / 312

Поделиться
Скачать
Panasonic KX-P7105 Скачать руководство пользователя страница 130

 

Upgrade Options

Settings and Printing

Network

Maintenance and Spec.

Maintenance and Spec.

 

4

 

The following upgrade options can be installed in the printer.

 

2nd Feeder (KX-PMF3)

 

Additional cassette can be used by installing this option. Refer to the installation
manual included in the option’s carton to install it.

 

Upgrade Kit (KX-PPSU5)

 

 - for PostScript

 

Printing for PostScript is available from Windows®*

 

1

 

 or Macintosh by installing this

option. To install it, see instructions.

 

RAM Board: 

 

16 MB (KX-PEM12) or 32 MB (KX-PEM13)

Enables to increase the printer’s memory. To install it, see the following instructions.

*

 

1

 

Microsoft® Windows® operating system (hereafter Windows)

 

CAUTION

 

• To prevent static electricity damage to the printer or optional board,
- Do not touch the connector of the printer board.
- Touch the printer’s bare metal frame often to discharge static electricity from your

body.

- Handle the circuit board only by the edges.
- Do not lay board on a metal surface.
• To prevent damage to the optional board, avoid exposing the optional board to direct

sunlight, high temperatures or humidity.

 

1

 

Turn the printer off, unplug the power cord and disconnect any cables
connected to the connectors on the back of the printer.

 

Upgrade Options

 

Installing the Upgrade Kit (for PostScript) or RAM Board

Содержание KX-P7105

























































































































































































































































































































Отзывы:

Нет отзывов