Panasonic KX-P7105 Скачать руководство пользователя страница 164 | Manualshive

Страница: 164 / 312

Panasonic KX-P7105 Скачать руководство пользователя страница 164

Troubleshooting

Settings and Printing

Network

Maintenance and Spec.

Maintenance and Spec.

38

4

Remove the toner cartridge from the drum unit.

5

If a paste/glue of a label is attached,

find the portion that it is attached

while rotating the gear of the photosensitive drum in the direction of the
arrow.

•The paste will be attached the portion that white or black spots of the print appear.

CAUTION

To prevent any damage to the drum unit, observe the following precautions.

• Do not rotate the photosensitive drum in the opposite direction of the above illustration,

otherwise the drum unit may be damaged.

• Do not touch the black drum surface.
• Do not expose the drum unit to light for more than 5 minutes.
• Do not expose the drum unit to direct sunlight.
• Do not keep the drum unit near dust or dirt.
• Do not place the drum unit in a high humidity area.

Paste

Gear

«
...
162
163
164
165
166
...
»

Содержание KX-P7105

























































































































































































































































































































Отзывы:

Нет отзывов