manualshive.com logo in svg

Panasonic KX-MB2085CX, Руководство по эксплуатации

Поделиться
Скачать
Panasonic KX-MB2085CX Скачать руководство пользователя страница 86

Display

Cause & Solution

“

REMOVE DOCUMENT

”

R

The document is jammed. Remove the jammed document (page 103).

R

Attempted to send or copy a document longer than 600 mm using the
automatic document feeder. Press 

M

STOP

N

 to remove the document. Divide

the document into two or more sheets and try again.

R

The ADF top cover is not fully closed. Push firmly on the front and rear edges
of the ADF top cover, and then feed the document again.

“

REMOVE PAPER IN INPUT

TRAY #2

”

R

The recording paper is installed in the manual input tray when trying to
receive faxes or print reports. Remove the recording paper from manual
input tray.

“

RX MEMORY FULL

”

R

The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Load paper (page 14) or remove the jammed
paper (page 98).

R

If the PC fax (feature #442 on page 64) is set to 

“

ALWAYS

”

,

– check the connection between the computer and the unit.
– check that the computer is turned ON.

R

If your unit is connected to the computer via the LAN and the fax preview
mode (feature #448 on page 51) is set to 

“

ON

”

,

– view, print or save the received fax documents, and then erase the

unnecessary documents (page 51).

– turn the setting to 

“

OFF

”

. The fax documents stored in memory will be

printed automatically.

“

SLEEP

”

R

After the unit has been in power save mode (feature #403 on page 59) for
up to 5 minutes, the unit will enter sleep mode. Press a key to standby the
unit for the next process.

Note:

R

The unit may not enter sleep mode when beeping for alert or displaying an
error message.

“

TONER EMPTY

”

R

The toner is empty. Replace the toner cartridge immediately.

“

TONER LOW

”

R

The toner is reaching the end of its life. You will need to replace the toner
cartridge soon.

“

TOP COVER OPEN

”

R

The top cover is open. Close it.

“

TRANSMIT ERROR

”

R

A transmission error occurred. Try again.

86

11. Help

Содержание KX-MB2085CX





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды