Panasonic KX-MB2085CX, Руководство по эксплуатации

Страница: 62 / 124

Feature/Code Selection
Setting the connecting tone
MBNM 4 NM 1 NM 6 N
If you often have trouble when sending faxes, this feature allows you to hear
connecting tones: fax tone, ring back tone and busy tone. You can use these
tones to confirm the status of the other party’s machine.
M 0 N “
OFF
” : Deactivates this feature.
M 1 N “
ON
” (default): You will hear connecting tones.
Note:
R If the ring back tone continues, the other party’s machine may not be a fax
machine or may have run out of paper. Check with the other party.
R The connecting tone volume cannot be adjusted.
Setting the maximum fax
speed
MBNM 4 NM 1 NM 8 N
M 1 N “
14.4kbps
”
M 2 N “
33.6kbps
” (default)
Note:
R The fax speed maybe lower than the selected speed depending on your line.
Setting the quick scan mode
MBNM 4 NM 1 NM 9 N
M 0 N “
OFF
” (default): Deactivates this feature.
M 1 N “
ALWAYS
” : The unit will scan the document and store it into memory first,
then the unit will start sending the documents. You can send faxes without
pressing
M QUICK SCAN N .
Confirming the destination
before sending a fax
MBNM 4 NM 2 NM 0 N
M 0 N “
OFF
” (default): Deactivates this feature.
M 1 N “
ON
” : You can send a fax after confirming the destination. When the
displayed destination is correct, press M START N to send the fax.
Setting dial keypad entry
restriction
MBNM 4 NM 2 NM 1 N
M 0 N “
OFF
” (default): Deactivates this feature.
M 1 N “
ON
” : If you want to restrict the use of the dial keypad for manually dialling
fax numbers (to avoid misdialling, for example), activate this feature.
Note:
R If you select “
ON
” , you cannot make redial calls to fax numbers entered
using the dial keypad.
R If you select “
ON
” , the fax number re-entry setting (feature #422 on
page 62) will be deactivated.
Setting the fax number
re-entry before sending
MBNM 4 NM 2 NM 2 N
M 0 N “
OFF
” (default): Deactivates this feature.
M 1 N “
ON
” : If you dial a fax number manually using the dial keypad, you have to
re-enter the number and press M START N . When the 2nd entry number matches
the 1st entry number, you can send the fax.
Confirming the next
document
MBNM 4 NM 2 NM 4 N
M 0 N “
OFF
” (default)
M 1 N “
ON
” : After the document is scanned using the automatic document feeder
during fax memory transmission, the message shows to confirm the next
document. Insert the next document and press
M SET N . A M START N
Activating the Distinctive
Ring feature
MBNM 4 NM 3 NM 0 N
Important:
R This feature is not available for KX-MB2085ML/KX-MB2090ML.
R This feature is not available when “
TUNISIA
” is selected in feature
#114 on page 55 (KX-MB2085CX/KX-MB2090CX only).
M 0 N “
OFF
” (default)
M 1 N “
ON
”
See page 54 for details.
62
9. Programmable Features