Panasonic KX-MB2085CX, Руководство по эксплуатации

Страница: 43 / 124

6.4.2 Adding a new item into the broadcast
memory
1
M PHONEBOOK N
2
Press MCN or MDN repeatedly to display the desired
broadcast memory location ( “
<BROADCAST>
” or
“
<MANUAL BROAD>
” ). A M MENU N A MGN
3
Press MCN or MDN repeatedly to display the item you
want to add. A M SET N
R To add other items, repeat this step (up to 20
items).
4
M STOP N
Note:
R When adding new items to the MANUAL
BROADCAST memory, you can only select stored
items.
6.4.3 Erasing a stored item from the
broadcast memory
1
M PHONEBOOK N
2
Press MCN or MDN repeatedly to display the desired
broadcast memory location ( “
<BROADCAST>
” or
“
<MANUAL BROAD>
” ). A M MENU N A MBN
3
Press MCN or MDN repeatedly to display the item you
want to erase.
R To cancel erasing, press M STOP N .
4
M SET N A M SET N A M STOP N
6.4.4 Sending the same document to
pre-programmed parties
To send the same document using the scanner glass
1.
Set the original (page 19).
2. If necessary, change the resolution (page 39) and the
contrast (page 39).
3. Press M BROADCAST N or M MANUAL BROAD N .
R To send a single page, go to step 5.
R To send multiple pages, go to the next step.
4. Place the next page. A M SET N
R To send more pages, repeat this step.
5. M START N
Note:
R To stop sending, see page 78.
R If you select “
FINE
” , “
SUPER FINE
” or “
PHOTO
”
resolution, the number of pages that the unit can
send will decrease.
R If the document exceeds the memory capacity,
sending will be cancelled.
R If a party is busy or does not answer, it will be skipped
and redialled later 2 or more times.
R After transmission, the unit will automatically print a
report (
broadcast sending report ).
To send the same document using the automatic
document feeder
1.
Set the original (page 20).
2. If necessary, change the resolution (page 39) and the
contrast (page 39).
3. Press M BROADCAST N or M MANUAL BROAD N .
43
6. Fax