Panasonic KX-MB1500HX, Руководство по эксплуатации

Страница: 58 / 88

Feature/Code Selection
Confirming the destination
before sending a fax
MBNM 4 NM 2 NM 0 N
M 0 N “
OFF
” (default): Deactivates this feature.
M 1 N “
ON
” : You can send a fax after confirming the destination. When the
displayed destination is correct, press M Start N to send the fax.
Setting dial keypad entry
restriction
MBNM 4 NM 2 NM 1 N
M 0 N “
OFF
” (default): Deactivates this feature.
M 1 N “
ON
” : If you do not wish to dial a fax number manually using the dial keypad,
activate this feature.
Note:
R If you select “
ON
” , you cannot make redial calls to fax numbers entered
using the dial keypad.
R If you select “
ON
” , the fax number re-entry setting (feature #422 on
page 58) will be deactivated.
Setting the fax number
re-entry before sending
MBNM 4 NM 2 NM 2 N
M 0 N “
OFF
” (default): Deactivates this feature.
M 1 N “
ON
” : If you dial a fax number manually using the dial keypad, you have to
re-enter the number and press M Start N . When the 2nd entry number matches
the 1st entry number, you can send the fax.
Setting auto reduction
feature
MBNM 4 NM 3 NM 2 N
To receive a fax document that is longer than your recording paper.
M 0 N “
OFF
” : Deactivates this feature.
M 1 N “
ON
” (default): The unit will fit received documents onto your recording
paper.
Changing the fax activation
code
MBNM 4 NM 3 NM 4 N
If you wish to use an extension telephone to receive faxes, activate this feature
and program the activation code.
Important:
R The fax activation code must be different from the code that you
programmed on the answering machine.
M 0 N “
OFF
”
M 1 N “
ON
” (default)
1. M Menu N A MBNM 4 NM 3 NM 4 N
2. Press M 1 N to select “
ON
” . A M Set N
3. Enter your code from 2 to 4 digits, using 0-9, MGN and MBN .
R The default code is “ H
#9
” .
4. M Set N A M Menu N
Setting the auto
disconnection
MBNM 4 NM 3 NM 5 N
To answer a call with an extension telephone in TEL/FAX mode (page 44),
activate this feature and program the code.
M 0 N “
OFF
”
M 1 N “
ON
” (default)
1. M Menu N A MBNM 4 NM 3 NM 5 N
2. Press M 1 N to select “
ON
” . A M Set N
3. Enter your code from 2 to 4 digits, using 0-9 and MGN .
R The default code is “ H
0
” .
4. M Set N A M Menu N
Changing the silent fax
recognition ring count
MBNM 4 NM 3 NM 6 N
To change the number of times the unit rings while in TEL/FAX mode.
M 3 N “
3
” (default)
M 4 N “
4
”
M 5 N “
5
”
M 6 N “
6
”
M 7 N “
7
”
M 8 N “
8
”
M 9 N “
9
”
Note:
R See page 44 for details.
58
8. Programmable Features