3
Load the paper, print-side down (
A
).
Important:
R
Push down to lock the plate (
B
) in the paper
input tray, if necessary.
A
B
4
Adjust the recording paper guides. Pinch the rear
guide (
A
), then slide it to match the paper size mark.
Pinch the right guide (
B
), then slide it to adjust the
width to the size of the recording paper.
R
Make sure that the recording paper is under the
paper limit mark (
C
), and the paper should not
be loaded over the snubbers (
D
).
A
B
D
C
5
Insert the paper input tray into the unit.
Note:
R
If the paper is not loaded correctly, re-adjust the
paper guides, or the paper may jam.
R
If the paper input tray does not close, the plate in the
paper input tray may not be in the locked position.
Push the paper down and make sure that the paper
is laying flat in the paper input tray.
To expand the paper exit
You can temporarily expand the paper exit before
printing.
– When printing on small sized paper, you can pull it
out easily.
– When printing several pages (20 to 30 pages), paper
stacking will be supported.
When using the automatic document feeder, we
recommend to replace the document cover to original
position beforehand (KX-MB1530 only).
14
1. Introduction and Installation