press
MGN
MBN
M
9
N
(default fax activation code)
firmly
.
3.
Replace the handset.
Note:
R
To stop receiving, see page 65.
R
To receive fax documents using the extension
telephone, make sure remote fax activation is turned
ON (feature #434 on page 58) beforehand. The
default setting is ON.
6.7.2 Activating TEL/FAX mode
1
Make sure feature #404 is set to
“
TEL/FAX
”
beforehand (page 56).
2
Press
M
Fax Auto Answer
N
repeatedly to display
“
TEL/FAX MODE
”
.
R
The
M
Fax Auto Answer
N
light turns OFF.
3
The ringer volume setting should be ON (page 20).
Fax Auto
Answer
M
Stop
N
M
SP-Phone
N
* The pictured model is KX-MB1520.
How phone calls and faxes are received
1. “
INCOMING CALL
”
will be displayed but the unit will
not ring.
2.
The unit will wait for the duration of
2 rings
before
answering the call.
R
The number of rings is determined by the
“TEL/
FAX delayed ring count”
(feature #212 on
page 56).
R
During this time, an extension telephone will ring.
3.
The unit will answer the call and try to detect a fax
calling tone.
When a fax calling tone is detected
The unit receives the fax automatically without
ringing.
When a fax calling tone is not detected
A
The unit will ring
3 times
. You may answer the call.
R
To answer the call, press
M
SP-Phone
N
and talk to
the other party.
R
To answer using another telephone connected to
the
[EXT]
jack of this unit, lift the handset, then
press
M
Stop
N
on the unit to talk to the other party.
* The pictured model is KX-MB1520.
R
To answer using another telephone connected to
the same telephone line as this unit, lift the
handset and press
MGN
M
0
N
(default auto
disconnection code, feature #435 on page 58)
to talk to the other party.
* The pictured model is KX-MB1520.
44
6. Fax (KX-MB1520/KX-MB1530 only)
