manualshive.com logo in svg

Panasonic KX-HTS32, Начало работы

Поделиться
Скачать
Panasonic KX-HTS32 Скачать руководство пользователя страница 95

Connection for 1000BASE-T

 

Switching Hub

 

PBX (LAN Port)

 

 

Signal Name

Pin No.

 

Pin No.

Signal Name

 

TRD0 (+)

1

1

TRD0 (+)

TRD0 (−)

2

2

TRD0 (−)

TRD1 (+)

3

3

TRD1 (+)

 

TRD2 (+)

4

4

TRD2 (+)

 

 

TRD2 (−)

5

5

TRD2 (−)

 

 

TRD1 (−)

6

6

TRD1 (−)

 

 

TRD3 (+)

7

7

TRD3 (+)

 

 

TRD3 (−)

8

8

TRD3 (−)

 

 

 

 

Note

•

Use an Ethernet cable with an RJ45 connector for connection to a switching hub. The cable should be
a CAT 5 (Category 5) or higher for 10BASE-T/100BASE-TX, or CAT 5e (Enhanced Category 5) or
higher for 1000BASE-T.

•

Make sure that all CAT 5/CAT 5e cables in use are not over 100 m (328 ft) in length.

•

Make sure to set the port of the switching hub that connects to the LAN port to operate under "Auto
Negotiation" mode.

•

Activate the spanning tree for the L2 switch to be connected.

•

If using the LAN/WAN port as a LAN, do not connect the LAN port and the LAN/WAN port to the same
L2 switch as this causes a network loop.

•

Make sure to create a spanning tree for LAN connection in order to prevent loops from occurring in a
multi-bridged environment. Otherwise, some packets may circulate for long periods of time and
eventually PBX performance system may degrade.

•

When using the WAN/LAN port as a LAN port, the port operates as an L2 switch hub of the LAN1
port.

•

The WAN/LAN port can be used as a Mirror port. For more information, refer to 3.1 Network
Configuration-LAN2/WAN2 Setting & Information-Port Mirroring in Programming Item List.

3.12.1 Wired LAN Connection

Getting Started

95

Содержание KX-HTS32





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды