•
APPLICABLE ONLY TO TELECOM CUSTOMERS WHO HAVE AUTOMATIC ACCESS TO OTHER
CARRIERS FOR TOLL CALLS
When calling back a number from the Caller ID list, all numbers prefixed with "0 + AREA CODE" will be
automatically forwarded to your toll carrier. This includes numbers in your local calling area. The zero +
area code should either be removed when calling back local numbers, or check with your toll carrier that a
charge will not be levied.
•
All persons using this device for recording telephone conversations shall comply with New Zealand law.
This requires that at least one party to the conversation is to be aware that it is being recorded. In
addition, the principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature
of the personal information collected, the purpose for its collection, how it is used, and what is disclosed
to any other party.
•
The SLT ports are not specifically designed for 3-wire-connected equipment. 3-wire-connected equipment
might not respond to incoming ringing when attached to these ports.
For users in Australia only
•
No External TRC Terminal is provided due to an Internal Link between PE and TRC.
For users in Taiwan only
•
Lithium battery can be found in the mother board of the PBX.
Notice
Regarding removing or replacing a battery in the circuit board, consult your dealer.
Note
•
When disposing of any of the above products, all batteries must be removed. Follow the applicable
laws, regulations, and guidelines in your country/area regarding disposal of batteries.
•
When replacing a battery, use only the same battery type, or an equivalent recommended by the
battery manufacturer.
Password Security
CAUTION
To the Administrator or Installer regarding the system password
1.
Please provide all system passwords to the customer.
2.
To avoid unauthorized access and possible abuse of the PBX, keep the passwords secret, and
inform the customer of the importance of the passwords, and the possible dangers if they become
known to others.
3.
The PBX has default passwords preset. For security, change these passwords the first time that
you program the PBX.
4.
Change the passwords periodically.
1.3 Precautions
16
Getting Started
