manualshive.com logo in svg

Panasonic KX-HTS32, Начало работы

Поделиться
Скачать
Panasonic KX-HTS32 Скачать руководство пользователя страница 88

Note

•

Use an Ethernet cable with an RJ45 connector to connect a PC to the PBX.

Connection via Internet

Router

Internet

PC

WAN Port

Note

For details about connecting WAN to the PBX, refer to "3.13 WAN Connection".

3.9.3  Starting Web Maintenance Console

System Requirements

For the system requirements of the PC (operating system, hardware specifications, supported browsers
etc.), refer to "1.3.1 Starting Web Maintenance Console" in the Programming Item List.

Copyright for MD5

This software uses the Source Code of RSA Data Security, Inc. described in the RFC1321 (MD5 Message-
Digest Algorithm).
Copyright (C) 1991-2, RSA Data Security, Inc. Created 1991. All rights reserved.
License to copy and use this software is granted provided that it is identified as the "RSA Data Security, Inc.
MD5 Message-Digest Algorithm" in all material mentioning or referencing this software or this function.
License is also granted to make and use derivative works provided that such works are identified as
"derived from the RSA Data Security, Inc. MD5 Message-Digest Algorithm" in all material mentioning or
referencing the derived work.
RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or
the suitability of this software for any particular purpose. It is provided "as is" without express or implied
warranty of any kind.
These notices must be retained in any copies of any part of this documentation and/or software.

Connecting to Web Maintenance Console via LAN

1.

Connect the PC to the PBX:

•

Connect the PBX to a network with the LAN port and access the PBX from a PC in your LAN. For
details, refer to "3.9.2 PC Connection".

3.9.3 Starting Web Maintenance Console

88

Getting Started

Содержание KX-HTS32





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды