5.1 System Data Backup and Restore
A PBX’s system data can be backed up to a USB memory device inserted into the PBX’s USB port or to a
PC in the PBX’s LAN network. At a later time, the backed up data can be restored to the PBX.
Note
Operation data that is presently running is stored to the KX-HTS’ internal storage with the following
timing.
•
When logging out of Web-MC
•
Every 30-minutes
To back up the system data to a USB memory device
•
Insert a USB memory device into the USB port of the PBX.
•
Note
•
The USB memory device must be compatible for use with the PBX. For details, refer to
"3.7 Connection of Peripherals".
To restore backed up data from a USB memory device to a PBX
•
For details about restoring backed up data stored on a USB memory, refer to "4.3.3 Maintenance—[2-3]
System Control—System Data Backup & Restore―System Data Restore" in the Programming Item List.
Note
•
System data must be stored in the directory below.
/private/meigroup/psn/hts/backup/dsys/
•
Data cannot be restored in the following cases.
–
The USB memory device hardware is faulty.
–
The data on the USB memory device has become corrupted.
–
The USB memory device is removed from the USB port of the PBX during the restoration
process.
•
After a system data restore, the main unit must be restarted using the Web Maintenance Console.
To back up the system data to a PC
•
Restoring backed up data from a PC to a PBX
•
For details about restoring backed up data stored on a PC, refer to "4.3.3 Maintenance—[2-3] System
Control—System Data Backup & Restore―System Data Restore" in the Programming Item List.
Note
•
After a system data restore, the main unit must be restarted using the Web Maintenance Console.
5.1 System Data Backup and Restore
102
Getting Started
