2.
Access Web Maintenance Console:
LAN
Connection: Launch your Web browser and input the IP address into the address bar. The input
method will differ according to the PC’s connection to the PBX. The default IP address for the LAN port
of the PBX is 192.168.0.101. Accordingly, the address to enter to connect to the PBX for the first time
will be as follows (enter the address exactly as shown):
http://192.168.0.101
WAN Connection:
When the WAN port of KX-HTS series is connected to an existing LAN and the PC is
also connected to the same existing LAN, it is possible to access the Web Maintenance Console as
shown below. The format of the address to enter to connect to the PBX will be as follows:
http://xxx.xxx.xxx.xxx
•
"xxx.xxx.xxx.xxx" is the IP address for the WAN port of the PBX.
•
The firewall of the PBX must be disabled in advance. Refer to 3.6.1 Network Configuration—[7-1]
Firewall—Firewall Setting in the Programming Item List
Note
•
The default subnet mask for the LAN port is 255.255.255.0.
3.
The Web Maintenance Console login screen is displayed. Log in with the Installer level account name
and the default Installer level account password to launch the Easy Setup Wizard. For details about the
Easy Setup Wizard, see "3.9.4.1 Easy Setup Wizard".
•
The Installer level account password is preprogrammed in
Web Maintenance Password for Local
Access
.
Refer to 4.2.1 Maintenance—[1-1] Management—Web Programming in the Programming Item List.
Connecting to Web Maintenance Console over the internet
When accessing the Web Maintenance Console over the Internet, it is necessary to use "https", which has
stronger security features than "http". (Remote access)
To enable that accessing to Web Maintenance Console over the internet
1.
Access the Web Maintenance Console via LAN.
2.
Set a password for Remote access. Refer to 4.2.1 Maintenance—[1-1] Management—Web
Programming—Web Maintenance Password for Remote Access in the Programming Item List.
3.
Enable Remote access by following one of the procedures below (open the HTTPS Port).
•
In Web Maintenance Console, Set
Remote Web Maintenance
to
Enable
Maintenance—[1-1] Management—Web Programming in the Programming Item List)
•
To connect to Web Maintenance Console over the internet
1.
Connect the PC to an internet. Refer to Connection via Internet in 3.9.2 PC Connection.
2.
Access Web Maintenance Console:
Launch your Web browser and input the IP address for the WAN port into the address bar. The input
method will differ according to the PC’s connection to the PBX. The address to enter to connect to the
PBX will be as follows:
https://xxx.xxx.xxx.xxx
•
"xxx.xxx.xxx.xxx" is the IP address for the WAN port of the PBX. This IP address is displayed in web
Maintenance Console. Refer to 3.1 Network Configuration—WAN1 Information—IP Address in the
Programming Item List.
•
Note the usage of "https" instead of "http".
3.9.3 Starting Web Maintenance Console
Getting Started
89
