Installation/Troubleshooting
6
1
Before Using
1.1
IMPORTANT SAFETY INSTRUCTIONS
When using this unit, basic safety precautions should always be followed to reduce
the risk of fire, electric shock, or personal injury.
1.
Read and understand all instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
After taking away the sand or the dust on the lens, wipe the lens with lens
cleaning paper.
6.
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
7.
Do not install near any heat sources such as radiators, heat registers, stoves,
or other devices (including amplifiers) that produce heat.
8.
Protect the AC adaptor cord and AC cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where they exit
from the unit.
9.
The AC cord is used as the main disconnect device, ensure that the socket-
outlet is located/installed near the equipment and is easily accessible.
10.
Only use attachments/accessories such as stand specified by the
manufacturer.
11.
Do not touch the unit, AC adaptor, AC adaptor cord or AC cord during lightning
storms.
12.
Unplug the unit when unused for long periods of time.
13.
Refer all servicing to qualified service personnel. Servicing is required when
the unit has been damaged in any way, such as when the AC adaptor, AC cord
or plug is damaged, the unit does not operate normally, or after the unit has
been dropped.
14.
Prolonged exposure to direct sunlight or halogen light may damage CCD
sensor.
15.
The camera is intended for indoor use only.
16.
Unplug this unit from power outlets if it emits smoke, an abnormal smell or
makes unusual noise. These conditions can cause fire or electric shock.
Confirm that smoke has stopped and contact an authorized service center.
SAVE THESE INSTRUCTIONS
kxhcm280ait.book 6 ページ ２００５年３月９日 水曜日 午後１時２３分
