Installation/Troubleshooting
16
3.
Select the camera to set up and click [Execute].
•
This program searches for the cameras that are connected to the router
and displays the MAC Addresses, IP addresses and Port Numbers.
•
The MAC Address (see page 11) on the bottom of the camera shows
which camera you select on the Camera List window.
Note
•
If more than 20 minutes have passed since the camera was turned on, the
camera cannot be set up from the Setup Program. In this situation,
disconnect the AC cord from the outlet, and reconnect it again.
•
The Setup Program may not list any cameras due to your firewall or
antivirus software settings on your PC. If you cannot disable your firewall
or antivirus software, you can set up the camera entering the camera MAC
address on the following window. The camera's MAC address can be
found on the label affixed to each camera. See page 27 for details.
Camera
Status
Camera
List window
Displays IPv4 or
IPv6 information.
Port
No.
MAC
Address
IP
Address
kxhcm280ait.book 16 ページ ２００５年３月９日 水曜日 午後１時２３分
