Installation/Troubleshooting
20
3.
Click [Automatic Setup (Internet Access)].
Note
In order for Internet access to be properly enabled, your routers UPnP™
feature should be enabled. Most router manufacturers disable this feature. See
http://panasonic.co.jp/pcc/products/en/netwkcam/
for more information.
4.
Enter the user name and password that were set, and click [OK].
5.
If your router supports UPnP™, select [Enable], otherwise select [Disable].
Then click [Next].
•
If you select [Disable], skip to step 9.
Sets up the camera to view on
the LAN.
Sets up the Internet access to
the camera.
Manually sets up the camera.
Disables IPsec. If disabled, the
button is displayed gray.
Displays the Setup page (see
page 37 of the Operating
Instructions on the Setup CD-
ROM).
kxhcm280ait.book 20 ページ ２００５年３月９日 水曜日 午後１時２３分
