97
Help
For Assistance, Call 1-800-435-7329
¡
The unit is checking if the film is set correctly. Wait for a while.
¡
The other fax machine does not have a polling feature. Check with the other
party.
¡
The receiving unit is busy or ran out of recording paper. Try again.
¡
The document is jammed. Remove the jammed document (p. 109).
¡
Attempted to transmit a document longer than 600 mm (23
5
⁄
8
w
). Press the STOP
button and remove the document (p. 109).
Divide the document into two or more sheets and try again.
¡
There is too much paper on the paper stacker. Remove the printed paper. If the
display message still remains after removing the paper, a paper jam may have
occurred. Remove the jammed paper (see “When paper has jammed near the
recording paper exit” on page 108).
¡
The starter film is empty. Replace the film or film cartridge with a new one (p. 110,
111).
¡
A transmission error occurred. Try again.
¡
The unit is too hot. Let the unit cool down.
DISPLAY MESSAGE
CAUSE & REMEDY
REMOVE DOCUMENT
TRANSMIT ERROR
STARTER FILM END
UNIT OVERHEATED
REMOVE PRINTOUT
REDIAL TIME OUT
POLLING ERROR
Error Messages
PLEASE WAIT