79
Multi-Function
Center/PC
Setup
Connecting to a computer
!
To run the Multi-Function Center software, you need the following software and hardware.
¡
IBM PC 386, or higher, or compatible meeting all AT bus specifications (DX 33Mhz minimum recommended)
¡
Microsoft Windows 3.1, 3.11 or Windows 95
¡
Hard Disk drive with at least fourteen (14) MB of available storage
¡
RS232C Serial Port
Note:
¡
The unit cannot print on envelopes.
»
If your PC has a 9 pin com port:
RS232C cable
(Included)
To COM port
25 Pin Male
25 Pin Adaptor
(Included)
9 Pin Female
»
If your PC has a 25 pin com port:
9 Pin Female
RS232C cable
(Included)
25 Pin Male
To COM port